StandardsIEEE 802.3IEEE 802.3uIEEE 802.3abIEEE 802.3zIEEE 802.3atIEEE 802.3afIEEE 802.3xDevice Interface4 x Gigabit PoE+ ports1 x Gigabit port1 x Gigabit SFP slot6-pin terminal block (removable)DIP switchDC power connectorLED indicatorsIntegrated DIN-Rail mountData Transfer RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex)Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)Gigabit: 2000 Mbps (full duplex)SX/LX: 2000 Mbps (full duplex)PerformanceData RAM Buffer: 512 KBSwitching Fabric: 12 GbpsMAC Address Table: 8 K entriesJumbo Frame: 10 KBForwarding rate: 8.9 Mpps (64-byte packet size)Special FeaturesFull PoE+ power to each PoE+ portHardened components rated for extreme temperaturesDual redundant power inputsAlarm output triggered by power failureAuto-NegotiationAuto store and forward architectureAutomatic address learning and address agingESD 8 KV and Surge 6 KV protectionOptional Power Adapter (48VDC3000 sold separately)Input: 100 - 240 V AC, 50/60 Hz, 2 AOutput: 48 V DC, 3.34 A 160 watts max.Optional Power Supply (TI-S24048 / TI-S12048 sold separately)Input: 100 – 240 V AC, 50/60 Hz, 1.8 A 125 – 370 V DCOutput: 240 Watts, 48 V, 5 ADIN-rail: TS-35/7.5 or 15Operating Temperature: - 25 to 70 °C (- 13 to 158 °F)Terminal BlockInput: PWR (Primary): 48 - 57 V DCRPS (Redundant): 48 - 57 V DCPower ConsumptionMin.: 10 Watts (standby)Max.: 130 WattsPoE budget: 120 Watts (Max.)PoEUp to 15.4 watts/port for PoEUp to 30 watts/port for PoE+PoE: pin 1, 2 for power + and pin 3, 6 for power - (mode A)HousingIP30 metal caseIntegrated DIN-rail mountGrounding point8 KV ESD protection6 KV Surge protectionOperating Temperature- 40 – 70 °C (- 40 - 158 °F)Operating HumidityMax. 95 % non-condensingDimensions135 x 100 x 30 mm (5.3 x 3.9 x 1.2 in.)Weight500 g (1.2 lbs.)CertificationsCEFCCShock (IEC 60068-2-27)Freefall (IEC 60068-2-32)Vibration (IEC 60068-2-6)WarrantyLimited Lifetime Warranty*